Fe99C0.2 Deva Metal Dre Beainnng and Axial Ball Bearing
After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation.
Bearing forms made to order: cylindrical bushes and flanged bushes with non-standard dimensions, spherical bearings, tubes and rod blanks, customized bearing designs. Self-lubricating – when in motion oil rises to the surface for lubrication and restores itself when at rest.
Maintenance-free bearing for general engineering applications.
|
MATERIAL |
FE, CU, FECU ALLOY, STAINLESS STEEL |
|
Style |
Spherical Bushing |
|
Size |
1) inner 3-70mm, also can according to your request |
|
Package |
inner packing: plastic bag |
| outer packing: carton, pallet | |
|
Physical Properties |
Specific load capacity static: 10 N/mm² |
| Specific load capacity dynamic: 5 N/mm² | |
| Sliding speed: 6.0 [ m/s ] | |
| Friction value: 0,05 to 0,20 [ µ ] | |
| Temperature strain: -40 to +200 [ °C ] | |
| Max. Pv - value: 1.6 [ N/mm² x m/s ] | |
| Bronze Bushing Hardness: HB 30-145 | |
| Surface Roughness:0.8-1.6 | |
| Yield Stength: 15,000 PSI | |
| Elongation: 1% | |
| “ K” Strength Constent(PSI): 26,500 | |
| Oil Centent: 18-22% (V) | |
| Density: 6.4-7.3 g/cm³ | |
|
Features |
Oil-impregnated; Self-lubricating |
| Wear resistant and long life service | |
| High performance bearing can be in extreme load, low speed reciprocating and oscillating applications | |
| Good thermal conductivity property | |
| Can be used in dirty and corrosive environment | |
| Noise much less than other bearing | |
| Suitable for high static load | |
| Can be applied in widely temperature | |
| Excellent corrosion resistance | |
|
Other Terms |
Quality Standards: ISO9001 |
| Quick Delivery: 15 Days | |
| Payment Terms: T/T,L/C,Paypal | |
| Shipment: By Sea / Air | |
| Delivery Terms: FOB,CFR,DDU | |
| Custom Registration No. : 3301965G49 | |
| Sliding Bearing HS-Code:8483300090 |
Specification:
Standard tolerance of inside diameter G7
Standard tolerance of outside diameter S7
Recommend shaft tolerance f7/g6
Recommend housing tolerance H7
Write your message here and send it to us
